POU Water Softener

POU WATER SOFTENER

Product Description

The existing softeners available are of high flow rate (around 500Lph) and higher capacity (around 2500Lph). The regeneration process of conventional softener is cumbersome; it involves number of valve operations.

The design of the POU Softener has evolved from the need to have a softener with affordable cost; also it should be convenient for domestic use. The new design called as POU Softener is user friendly and specially meant for POU application such as geysers, washing machines and bathroom appliances.

POU softener is a sleek wall mounted model that is designed to reduce the calcium and magnesium ions (hardness) from water thus making the water soft.

This POU softener has the convenience of a knob for selecting soft water output and recharging the softener.

Unique Selling Properties

Soft water available on the twist of a knob

Convenient way of recharging the media. (Single operation by turning the knob)

Low-pressure operation – Does not require higher pressures / works on lower pressure

Easy to fit, sleek wall mounted design

The new designed POU Softener has following main components

Pressure tank comprising of resin

Salt saturator

Multiport valve

Product Specification:

Flow rate of treated water 8 - 10 lit/m Max.

Maximum allowable Hardness in inlet water as Caco₃ 500 ppm (CaCo₃)

Hardness in treated water as CaCo₃ < 50 ppm

Minimum– maximum inlet pressure
0.5 – 4 kg/cm²

Dimensions
550mm (height) X 150mm (Diameter)

Weight
6.85 Kg

Note

The Softenizer only removes excess hardness from water but it does not disinfect the water

Use an inlet valve to open and close the iron removal unit

Inlet water should be free from oil, grease and excessive turbidity

Flow rate of treated water	8 - 10 lit/m Max.
Maximum allowable Hardness in inlet water as Caco₃	500 ppm (CaCo₃)
Hardness in treated water as CaCo₃	< 50 ppm
Minimum– maximum inlet pressure	0.5 – 4 kg/cm²
Dimensions	550mm (height) X 150mm (Diameter)
Weight	6.85 Kg